High quality copper wire mesh

Brass: As the alloy of copper and zinc, brass wire mesh has excellent abrasion resistance, corrosion-resisting, lower electric conductivity as compared with copper.

 Copper: Copper wire offers excellent electrical and thermal conductivity, it is non-magnetic, anti-sparking and is resistance to atmospheric corrosion, salt air and brine. Copper applications are limited due to its low tensile strength, poor resistance to abrasion and common acids.

Phosphor bronze is an alloy of Tin, phosphor and copper. It is corrosion-resisting, wear-resisting, tear-resisting, but not suitable for exposure to hydrochloric acid or strong oxidizing agents.

Specification:
Material:Copper/Brass/Phosphor bronze
Mesh count: 6 mesh/inch - 200 mesh/inch
Opening:0.076mm - 3.522mm
Wire diameter: 0.051mm - 0.711mm
Width:1m, 1.22m or at client's request.
Length: 30m or 50m or at client's request.
Usage: Separation and sifting kinds pellet, grain, porcelain earth and glass, chinaware printing, filter liquid.RFI shielding, Faraday cages, Tempest shileding etc.
Advantages:Non-magnetic, anti-sparking and resistant to atmospherice corrosion, salt air and brine.Soft, easy to cut or soldered.

Copper: Copper wire offers excellent electrical and thermal conductivity, it is non-magnetic, anti-sparking and is resistance to atmospheric corrosion, salt air and brine. Copper applications are limited due to its low tensile strength, poor resistance to abrasion and common acids.

Brass: As the alloy of copper and zinc, brass wire mesh has excellent abrasion resistance, corrosion-resisting, lower electric conductivity as compared with copper.

Phosphor bronze: As the alloy of Tin, phosphor and copper. It is corrosion-resisting, wear-resisting, tear-resisting, but not suitable for exposure to hydrochloric acid or strong oxidizing agents.

Specifications listed below:

1. Raw material check

2. Material preparation

3. Finish dia.warping beam

4. Mesh wearing

5. Surface check